[General] paraview after installation problem (illegal instruction core dumped)

giack · January 13, 2014, 03:13

Hi to all,
I have a problem in starting paraview. In fact when I start it this error message appeare in the terminal

illegal instruction (core dumped)

You ever seen this error?

I istalled the last version of Openfoam in a virtualmachine with ubuntu 12.04 a 32bit

Thanks to all

vdoucet · January 21, 2014, 06:42

Hi, I have the same !
I'm running Xubuntu 13.10 on a VirtualBox (the machine is 64bits but the VirtualBox Xubuntu is 32bits), I installed openFoam / paraFoam according to the tutorial without any trouble and when I'm at testing, I get the same message ...

giack · January 21, 2014, 08:01

I have to try with the 64bit version...

Please contact me if you resolve the problem

vdoucet · January 21, 2014, 09:03

Working !
I went to bios to activate the VT option ... which allowed the VirtualBox to run more than one processor (I set it to 2) and it's running now ...

giack · January 21, 2014, 15:18

thank you very much

January 13, 2014, 03:13	paraview after installation problem (illegal instruction core dumped)	#1
giack Member Join Date: Mar 2013 Posts: 98 Rep Power: 13	Hi to all, I have a problem in starting paraview. In fact when I start it this error message appeare in the terminal illegal instruction (core dumped) You ever seen this error? I istalled the last version of Openfoam in a virtualmachine with ubuntu 12.04 a 32bit Thanks to all

January 21, 2014, 09:03		#4
vdoucet New Member Vincent Doucet Join Date: Nov 2012 Location: Pau, France Posts: 2 Rep Power: 0	Working ! I went to bios to activate the VT option ... which allowed the VirtualBox to run more than one processor (I set it to 2) and it's running now ... wyldckat likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
installation Problem - Linux distribution (Not a meshing problem)	v_herw	Pointwise & Gridgen	2	June 20, 2016 15:47
Installation problem - calling blockMesh - libblockMesh.so	aylalisa	OpenFOAM Installation	5	November 28, 2012 10:55
[General] Problem in using paraview	meballav	ParaView	11	October 12, 2012 17:03
Installation Problem with ParaView 3.12.0 on Scientific Linux 5.7	Wley	OpenFOAM Installation	2	September 28, 2012 07:06
paraFoam reader for OpenFOAM 1.6	smart	OpenFOAM Installation	13	November 16, 2009 22:41

January 21, 2014, 06:42		#2
vdoucet New Member Vincent Doucet Join Date: Nov 2012 Location: Pau, France Posts: 2 Rep Power: 0	Hi, I have the same ! I'm running Xubuntu 13.10 on a VirtualBox (the machine is 64bits but the VirtualBox Xubuntu is 32bits), I installed openFoam / paraFoam according to the tutorial without any trouble and when I'm at testing, I get the same message ...

January 21, 2014, 08:01		#3
giack Member Join Date: Mar 2013 Posts: 98 Rep Power: 13	I have to try with the 64bit version... Please contact me if you resolve the problem

January 21, 2014, 15:18		#5
giack Member Join Date: Mar 2013 Posts: 98 Rep Power: 13	thank you very much