some results with Kl-kw-w transition model

Far · June 10, 2013, 17:07

Transition model = K-Kl-omega
Reynolds number = 5e04
Turbulence Intensity = 0.4%
Time step is taken in such a way so that one cycle is modelled in 100 time steps.
Cylinder is modeled as moving zone and purpose of this study is to observe the effects of upstream wakes on boundary layer transition in downstream low pressure turbine rotor profile.

Far · June 10, 2013, 17:11

diamondx · June 10, 2013, 17:16

nice, very nice

diamondx · June 11, 2013, 16:20

i was testing cfd-post and i made this yesterday: http://youtu.be/ghl6WKlNWnA i don't know about the accuracy of the resultsbut cfd-post is really a powerful tool

RodriguezFatz · June 12, 2013, 03:46

How long did it take to create that video? Must be hours, right?

Far · June 12, 2013, 04:46

Yes. Around 3.3 hours for one cycle.

diamondx · June 12, 2013, 09:32

it took me days for that video... more than 400 time steps, and the mesh is 1.2 million nodes

Far · June 12, 2013, 10:00

400 time steps! wow

June 10, 2013, 17:07	some results with Kl-kw-w transition model	#1
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	Transition model = K-Kl-omega Reynolds number = 5e04 Turbulence Intensity = 0.4% Time step is taken in such a way so that one cycle is modelled in 100 time steps. Cylinder is modeled as moving zone and purpose of this study is to observe the effects of upstream wakes on boundary layer transition in downstream low pressure turbine rotor profile. kiddmax and ghost82 like this.

June 10, 2013, 17:11	another view	#2
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	ghost82 likes this.

June 10, 2013, 17:16		#3
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	nice, very nice Far likes this. __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

June 11, 2013, 16:20		#4
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	i was testing cfd-post and i made this yesterday: http://youtu.be/ghl6WKlNWnA i don't know about the accuracy of the resultsbut cfd-post is really a powerful tool __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

June 12, 2013, 03:46		#5
RodriguezFatz Senior Member Philipp Join Date: Jun 2011 Location: Germany Posts: 1,297 Rep Power: 27	How long did it take to create that video? Must be hours, right? __________________ The skeleton ran out of shampoo in the shower.

June 12, 2013, 04:46		#6
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	Yes. Around 3.3 hours for one cycle.

June 12, 2013, 09:32		#7
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	it took me days for that video... more than 400 time steps, and the mesh is 1.2 million nodes __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

June 12, 2013, 10:00		#8
Far Senior Member Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,558 Blog Entries: 6 Rep Power: 54	400 time steps! wow Last edited by Far; June 12, 2013 at 11:09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of k-epsilon and k-omega Models	Jade M	Main CFD Forum	40	January 27, 2023 08:18
menter correlation based transition model (Gamma - Retheta)	mb.pejvak	Main CFD Forum	0	February 22, 2012 22:39
Model of pump nonoptimal regimes get bad results	Georg	CFX	3	May 21, 2008 01:53
modelling transition with v2f turbulence model	pablo	FLUENT	0	August 7, 2006 16:44
k-omega model constants for transition	Peter Gasparovic	FLUENT	1	May 24, 2005 04:58