Help Needed: Polyline intersection in Post

PHabib · July 3, 2009, 05:18

Hallo all,

I'm currently trying to make a polyline as intersection between two planes in ANSYS Post. The only method that I found is to intersect a plane with a boundary. Does anyone know how to build the polyline (or similiar) as intersection between two user-planes? e.g. to make a polyline at a given distance in front of a blade at 50% span (intersection with a vertical plane at given distance and a hoizontal plane at 50% blade span).

PS: I'm using ANSYS 11.0

Help will be much appreciated, thanks in advance

Habib

smn · July 7, 2009, 04:43

hi:
this is also my problem in post-processing!!!
thx for your help

PHabib · July 8, 2009, 05:15

Hi smn,

glad to know I'm not the only one with the problem.

(btw are you thanking me? I think I didn't gave a solution whatsoever

)

longbow · July 10, 2009, 09:09

Unfortunately, CFX-Post does not allow user to create polyline from the interaction between two planes. The workaround is to put a contour on horizontal plane at 50% blade span. That contour should use axial coordinate as variable with only two levels. Make contour range min or max at where you want to create polyline. Now you can create polyline from contour.

PHabib · July 13, 2009, 05:04

Hi longbow, thank you very much for the solution. I'll try to use the workaround.

July 3, 2009, 05:18	Help Needed: Polyline intersection in Post	#1
PHabib New Member Join Date: Jul 2009 Location: Aachen, Germany Posts: 8 Rep Power: 17	Hallo all, I'm currently trying to make a polyline as intersection between two planes in ANSYS Post. The only method that I found is to intersect a plane with a boundary. Does anyone know how to build the polyline (or similiar) as intersection between two user-planes? e.g. to make a polyline at a given distance in front of a blade at 50% span (intersection with a vertical plane at given distance and a hoizontal plane at 50% blade span). PS: I'm using ANSYS 11.0 Help will be much appreciated, thanks in advance Habib

July 10, 2009, 09:09		#4
longbow New Member Join Date: Apr 2009 Posts: 14 Rep Power: 17	Unfortunately, CFX-Post does not allow user to create polyline from the interaction between two planes. The workaround is to put a contour on horizontal plane at 50% blade span. That contour should use axial coordinate as variable with only two levels. Make contour range min or max at where you want to create polyline. Now you can create polyline from contour. Mazze[ITA] likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Polyline at intersection of two planes	Francesco	CFX	2	July 29, 2009 09:03
Post processing free surface.	Juan Martin Catelén	CFX	2	April 20, 2007 14:20
different value in post - help needed	tuks	CFX	8	April 29, 2005 17:47
Post Processing in FEM	Abhijit Tilak	Main CFD Forum	0	April 26, 2004 12:59
Urgent help needed in post!!. processing results..	Deadly	FLUENT	0	August 21, 2002 01:42

July 7, 2009, 04:43		#2
smn Member Join Date: Jun 2009 Posts: 56 Rep Power: 17	hi: this is also my problem in post-processing!!! thx for your help

July 8, 2009, 05:15		#3
PHabib New Member Join Date: Jul 2009 Location: Aachen, Germany Posts: 8 Rep Power: 17	Hi smn, glad to know I'm not the only one with the problem. (btw are you thanking me? I think I didn't gave a solution whatsoever )

July 13, 2009, 05:04		#5
PHabib New Member Join Date: Jul 2009 Location: Aachen, Germany Posts: 8 Rep Power: 17	Hi longbow, thank you very much for the solution. I'll try to use the workaround.