CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Sutherland's law

Sutherland's law

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
m
 
(4 intermediate revisions not shown)
Line 1: Line 1:
-
In 1893 [http://en.wikipedia.org/wiki/William_Sutherland_(physicist) William Sutherland], an Australian physicist, published a relationship between the dynamic visocity, <math>\mu</math>, and the absolute temperature, <math>T</math>, of an ideal gas. This formula, often called Sutherland's law, is based on kinetic theory of ideal gases and an idealized intermolecular-force potential. Sutherland's law is still commonly used and most often gives fairly accurate results with an error less than a few percent over a wide range of temperatures. Sutherland's law can be expressed as:
+
In 1893 [http://en.wikipedia.org/wiki/William_Sutherland_(physicist) William Sutherland], an Australian physicist, published a relationship between the dynamic viscosity, <math>\mu</math>, and the absolute temperature, <math>T</math>, of an ideal gas. This formula, often called Sutherland's law, is based on kinetic theory of ideal gases and an idealized intermolecular-force potential. Sutherland's law is still commonly used and most often gives fairly accurate results with an error less than a few percent over a wide range of temperatures. Sutherland's law can be expressed as:
-
:<math>\mu = \mu_ref \left( \frac{T}{T_ref} \right)^{3/2}\frac{T_ref + S}{T + S}</math>
+
:<math>\mu = \mu_{ref} \left( \frac{T}{T_{ref}} \right)^{3/2}\frac{T_{ref} + S}{T + S}</math>
-
:<math>T_ref</math> is a reference temperature.
+
:<math>T_{ref}</math> is a reference temperature.
-
:<math>\mu_ref</math> is the viscosity at the <math>T_ref</math> reference temperature
+
:<math>\mu_{ref}</math> is the viscosity at the <math>T_{ref}</math> reference temperature
:S is the Sutherland temperature
:S is the Sutherland temperature
Line 13: Line 13:
Comparing the formulas above the <math>C_1</math> constant can be written as:
Comparing the formulas above the <math>C_1</math> constant can be written as:
-
:<math>C_1 = \frac{\mu_ref}{T_ref^{3/2}}(T_ref + S)</math>
+
:<math>C_1 = \frac{\mu_{ref}}{T_{ref}^{3/2}}(T_{ref} + S)</math>
-
{| align=center border=1
+
{| border=2
-
|+ Sutherland's law coefficients
+
|+ Sutherland's law coefficients:
-
! Gas !! <math>\mu_0 [\frac{kg}{m s}]</math> !! <math>T_0 [K]</math> !! <math>S [K]</math> !! <math>C_1 [\frac{kg}{m s K ^ {0.5}}]</math>  
+
! Gas !! <math>\mu_0 [\frac{kg}{m s}]</math> !! <math>T_0 [K]</math> !! <math>S [K]</math> !! <math>C_1 [\frac{kg}{m s \sqrt{K}}]</math>  
|-
|-
| Air  
| Air  

Latest revision as of 04:13, 25 October 2008

In 1893 William Sutherland, an Australian physicist, published a relationship between the dynamic viscosity, \mu, and the absolute temperature, T, of an ideal gas. This formula, often called Sutherland's law, is based on kinetic theory of ideal gases and an idealized intermolecular-force potential. Sutherland's law is still commonly used and most often gives fairly accurate results with an error less than a few percent over a wide range of temperatures. Sutherland's law can be expressed as:

\mu = \mu_{ref} \left( \frac{T}{T_{ref}} \right)^{3/2}\frac{T_{ref} + S}{T + S}
T_{ref} is a reference temperature.
\mu_{ref} is the viscosity at the T_{ref} reference temperature
S is the Sutherland temperature

Some authors instead express Sutherland's law in the following form:

\mu = \frac{C_1 T^{3/2}}{T + S}

Comparing the formulas above the C_1 constant can be written as:

C_1 = \frac{\mu_{ref}}{T_{ref}^{3/2}}(T_{ref} + S)
Sutherland's law coefficients:
Gas \mu_0 [\frac{kg}{m s}] T_0 [K] S [K] C_1 [\frac{kg}{m s \sqrt{K}}]
Air 1.716 \times 10^{-5} 273.15 110.4 1.458 \times 10^{-6}

References

  • Sutherland, W. (1893), "The viscosity of gases and molecular force", Philosophical Magazine, S. 5, 36, pp. 507-531 (1893).
My wiki