CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Skin friction coefficient

Skin friction coefficient

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(To do)
(To do)
Line 90: Line 90:
Taking into account that the flow is laminar for the first part of the plate and using Blasius's equeation, after providing corrective some corrective factors , Schlichting in page 644 states:
Taking into account that the flow is laminar for the first part of the plate and using Blasius's equeation, after providing corrective some corrective factors , Schlichting in page 644 states:
Cf=0.02666*Rl^(-0.139)
Cf=0.02666*Rl^(-0.139)
 +
grizos

Revision as of 19:03, 13 January 2016

The skin friction coefficient, C_f, is defined by:

C_f \equiv \frac{\tau_w}{\frac{1}{2} \, \rho \, U_\infty^2}

Where \tau_w is the local wall shear stress, \rho is the fluid density and U_\infty is the free-stream velocity (usually taken ouside of the boundary layer or at the inlet).

For a turbulent boundary layer several approximation formulas for the local skin friction for a flat plate can be used:

1/7 power law:

C_f = 0.0576 Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7

1/7 power law with experimental calibration (equation 21.12 in [3]):

C_f = 0.0592 \, Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7

Schlichting (equation 21.16 footnote in [3])

C_f = [ 2 \, log_{10}(Re_x) - 0.65 ] ^{-2.3} \quad \mbox{for} \quad Re_x < 10^9

Schultz-Grunov (equation 21.19a in [3]):

C_f = 0.370 \, [ log_{10}(Re_x) ]^{-2.584}

(equation 38 in [1]):

1.0/C_f^{1/2} = 1.7 + 4.15 \, log_{10} (Re_x \, C_f)

The following skin friction formulas are extracted from [2],p.19. Proper reference needed:

Prandtl (1927):

 C_f = 0.074 \, Re_x^{-1/5}

Telfer (1927):

 C_f = 0.34 \, Re_x^{-1/3} + 0.0012

Prandtl-Schlichting (1932):

 C_f = 0.455 \, [ log_{10}(Re_x)]^{-2.58}

Schoenherr (1932):

 C_f = 0.0586 \, [ log_{10}(Re_x \, C_f )]^{-2}

Schultz-Grunov (1940):

 C_f = 0.427 \, [ log_{10}(Re_x) - 0.407]^{-2.64}

Kempf-Karman (1951):

 C_f = 0.055 \, Re_x^{-0.182}

Lap-Troost (1952):

 C_f = 0.0648 \, [log_{10}(Re_x \, C_f^{0.5})-0.9526]^{-2}

Landweber (1953):

 C_f = 0.0816 \, [log_{10}(Re_x) - 1.703]^{-2}

Hughes (1954):

 C_f = 0.067 \, [log_{10}(Re_x) - 2 ] ^{-2}

Wieghard (1955):

 C_f = 0.52 \, [log_{10}(Re_x)] ^{-2.685}

ITTC (1957):

 C_f = 0.075 \, [log_{10}(Re_x) - 2 ] ^{-2}

Gadd (1967):

 C_f = 0.0113 \, [log_{10}(Re_x) - 3.7 ] ^{-1.15}

Granville (1977):

 C_f = 0.0776 \, [log_{10}(Re_x) - 1.88 ] ^{-2} + 60 \, Re_x^{-1}

Date Turnock (1999):

 C_f = [4.06 \, log_{10}(Re_x \, C_f) - 0.729]^{-2}


References

  1. von Karman, Theodore (1934), "Turbulence and Skin Friction", J. of the Aeronautical Sciences, Vol. 1, No 1, 1934, pp. 1-20.
  2. Lazauskas, Leo Victor (2005), "Hydrodynamics of Advanced High-Speed Sealift Vessels", Master Thesis, University of Adelaide, Australia (download).
  3. Schlichting, Hermann (1979), Boundary Layer Theory, ISBN 0-07-055334-3, 7th Edition.

To do

Someone should add more data about total skin friction approximations, Prandtl-Schlichting skin-friction formula, and the Karman-Schoenherr equation. Add proper reference for equations in [2]



Edit: With regards to the 1/7th power law, in Schlichtings book (see references) the formula describing Cf over a flat plate , without pressure gradient, is Cf=0.0725*Re^(-1/5) and it is valid between 5x10^5<Re<10^7 with the assumption of the flow being turbulent from the leading edge (page 639) This is found in page 638 , formula 21.11.

Taking into account that the flow is laminar for the first part of the plate and using Blasius's equeation, after providing corrective some corrective factors , Schlichting in page 644 states: Cf=0.02666*Rl^(-0.139) grizos

My wiki