CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Mesh generation

Mesh generation

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
===What is mesh generation?===
+
===Introduction===
-
<p>The set of partial differential equations governing fluid flows and heat transfers are not amenable to analytical solutions, except for very simple cases.  Therefore, in general, in order to analyze fluid flows, flow domains are split into smaller portions (made up of geometric primitives like hexahedra and tatrahedra in 3D, and quadrilaterals and triangles in 2D) and linearized governing equations are solved inside each of these portions of the domain. Care is taken to ensure continuity of solution across the common interfaces between two portions, so that the linearized solutions inside various portions can be put together to give a complete picture of fluid flow in the entire domain. Each of these portions of the domain are known as elements, and the collection of all elements is known as mesh or grid. The origin of the term mesh (or grid) goes back to early days of CFD when most analyses were 2D in nature. For 2D analysis, a domain split into elements resembles a wire mesh, hence the name.</p>
+
<p>The partial differential equations that governs fluid flow and heat transfer are not usually amenable to analytical solutions, except for very simple cases.  Therefore, in order to analyze fluid flows, flow domains are split into smaller subdomains (made up of geometric primitives like hexahedra and tatrahedra in 3D, and quadrilaterals and triangles in 2D) and discretized governing equations are solved inside each of these portions of the domain. Typically, one of three methods is used to solve the approximate version of the system of equations: finite volumes, finite elements, or finite differences.  Care must taken to ensure proper continuity of solution across the common interfaces between two subdomains, so that the approximate solutions inside various portions can be put together to give a complete picture of fluid flow in the entire domain. Each of these portions of the domain are known as elements or cells, and the collection of all elements is known as mesh or grid. The origin of the term mesh (or grid) goes back to early days of CFD when most analyses were 2D in nature. For 2D analysis, a domain split into elements resembles a wire mesh, hence the name.</p>
An example of a 2D analysis domain (flow over a backward facing step) and its mesh are shown in pictures below.
An example of a 2D analysis domain (flow over a backward facing step) and its mesh are shown in pictures below.
Line 6: Line 6:
[[Image:Domain.png|Domain for 2D analysis of backward facing step]]
[[Image:Domain.png|Domain for 2D analysis of backward facing step]]
[[Image:Domain-mesh.png|Meshed domain]]
[[Image:Domain-mesh.png|Meshed domain]]
 +
 +
The process of obtaining an appropriate mesh (or grid) is termed mesh generation (or grid generation), and has long been considered a bottleneck in the analysis process due to the lack of a fully automatic mesh generation procedure.  Specialized software progams have been developed for the purpose of mesh and grid generation, and access to a good software package and expertise in using this software are vital to the success of a modeling effort.
===Mesh classification===
===Mesh classification===

Revision as of 22:25, 9 July 2006

Introduction

The partial differential equations that governs fluid flow and heat transfer are not usually amenable to analytical solutions, except for very simple cases. Therefore, in order to analyze fluid flows, flow domains are split into smaller subdomains (made up of geometric primitives like hexahedra and tatrahedra in 3D, and quadrilaterals and triangles in 2D) and discretized governing equations are solved inside each of these portions of the domain. Typically, one of three methods is used to solve the approximate version of the system of equations: finite volumes, finite elements, or finite differences. Care must taken to ensure proper continuity of solution across the common interfaces between two subdomains, so that the approximate solutions inside various portions can be put together to give a complete picture of fluid flow in the entire domain. Each of these portions of the domain are known as elements or cells, and the collection of all elements is known as mesh or grid. The origin of the term mesh (or grid) goes back to early days of CFD when most analyses were 2D in nature. For 2D analysis, a domain split into elements resembles a wire mesh, hence the name.

An example of a 2D analysis domain (flow over a backward facing step) and its mesh are shown in pictures below.

Domain for 2D analysis of backward facing step Meshed domain

The process of obtaining an appropriate mesh (or grid) is termed mesh generation (or grid generation), and has long been considered a bottleneck in the analysis process due to the lack of a fully automatic mesh generation procedure. Specialized software progams have been developed for the purpose of mesh and grid generation, and access to a good software package and expertise in using this software are vital to the success of a modeling effort.

Mesh classification

As CFD has developed, better algorithms and more computation power has become available to CFD analysts, resulting in diverse solver techniques and support. One of the direct results of such developments on the field of mesh generation is development of different types of mesh elements and how they are connected to each other. As a result, meshes can be classified based one on or more the following important criteria:


My wiki