CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Introduction to turbulence/Wall bounded turbulent flows

Introduction to turbulence/Wall bounded turbulent flows

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(The “inner” turbulent boundary layer)
(The “inner” turbulent boundary layer)
Line 317: Line 317:
</td><td width="5%">(20)</td></tr></table>
</td><td width="5%">(20)</td></tr></table>
-
We immediately recognize one of the most important ideas in the history of boundary layer theory; namely that in the limit of infinite Reynolds number '''the  total stress in the wall layer is constant'''. Not surprisingly, the wall layer is referred to quite properly as the '''Constant Stress Layer'''. It is important not to forget (as many who work in this field do) that this result is valid only in the limit of infinite Reynolds number. At finite Reynolds numbers the total stress is almost constant, but never quite so because of the terms we have neglected. This difference may seem slight, but it can make all the difference in the world if you are trying to build an asymptotically correct theory, or even just understand your experiments.
+
We immediately recognize one of the most important ideas in the history of boundary layer theory; namely that in the limit of infinite Reynolds number '''the  total stress in the wall layer is constant'''. Not surprisingly, the wall layer is referred to quite properly as the '''Constant Stress Layer'''. It is important not to forget (as many who work in this field do) that this result is valid ''only'' in the limit of infinite Reynolds number. At finite Reynolds numbers the total stress is almost constant, but never quite so because of the terms we have neglected. This difference may seem slight, but it can make all the difference in the world if you are trying to build an asymptotically correct theory, or even just understand your experiments.
Before leaving this section we need to resolve the important questions of what
Before leaving this section we need to resolve the important questions of what
-
is uw, our inner velocity scale. It is customary to define something called the
+
is <math>u_{w}</math>, our inner velocity scale. It is customary to define something called the ''friction velocity'', usually denoted as <math>u_{*}</math>, by:
-
friction velocity, usually denoted as u�, by:
+
 
u2
u2
� �
� �

Revision as of 18:47, 30 October 2011

Contents

Introduction

Without the presence of walls or surfaces, turbulence in the absence of density fluctuations could not exist. This is because it is only at surfaces that vorticity can actually be generated by an on-coming flow is suddenly brought to rest to satisfy the no-slip condition. The vorticity generated at the leading edge can then be diffused, transported and amplified. But it can only be generated at the wall, and then only at the leading edge at that. Once the vorticity has been generated, some flows go on to develop in the absence of walls, like the free shear flows we considered earlier. Other flows remained “attached” to the surface and evolve entirely under the influence of it. These are generally referred to as “wall-bounded flows” or “boundary layer flows”. The most obvious causes for the effects of the wall on the flow arise from the wall-boundary conditions. In particular,

  • The kinematic boundary condition demands that the normal velocity of

the fluid on the surface be equal to the normal velocity of the surface. This means there can be no-flow through the surface. Since the velocity normal to the surface cannot just suddenly vanish, the kinematic boundary condition ensures that the normal velocity components in wall-bounded flows are usually much less than in free shear flows. Thus the presence of the wall reduces the entrainment rate. Note that viscosity is not necessary in the equations to satisfy this condition, and it can be met even by solutions to to the inviscid Euler’s equations.


  • The no-slip boundary condition demands that the velocity component tangential to the wall be the same as the tangential velocity of the wall. If the

wall is at rest relative, then the no-slip condition demands the tangential flow velocity be identically zero at the surface.


Figure 8.1: Flow around a simple airfoil without separation.


It is the no-slip condition, of course, that led Ludwig Prandtl1 to the whole idea of a boundary layer in the first place. Professor Prandt literally saved fluid mechanics from d’Alembert’s paradox: the fact that there seemed to be no drag in an inviscid fluid (not counting form drag). Prior to Prandtl, everyone thought that as the Reynolds number increased, the flow should behave more and more like an inviscid fluid. But when there were surfaces, it clearly didn’t. Instead of behaving like those nice potential flow solutions (like around cylinders, for example), the flow not only produced drag, but often separated and produced wakes and other free shear flows. Clearly something was very wrong, and as a result fluid mechanics didn’t get much respect from engineers in the 19th century.


And with good reason: how useful could a bunch of equations be if they couldn’t find viscous drag, much less predict how much. But Prandtl’s idea of the boundary layer saved everything.

Prandtl’s great idea was the recognition that the viscous no-slip condition could not be met without somehow retaining at least one viscous stress term in the equations. As we shall see below, this implies that there must be at least two length scales in the flow, unlike the free shear flows we considered in the previous chapter for which the mean flow could be characterized by only a single length scale. The second length scale characterizes changes normal to the wall, and make it clear precisely which viscous term in the instantaneous equations is important.

Review of laminar boundary layers

Let’s work this all out for ourselves by considering what happens if we try to apply the kinematic and no-slip boundary conditions to obtain solutions of the Navier-Stokes equations in the infinite Reynolds number limit. Let’s restrict our attention for the moment to the laminar flow of a uniform stream of speed, U_o, around a body of characteristic dimension, D, as shown in Figure 8.1. It is easy to see the problem if we non-dimensionalize our equations using the free stream boundary condition and body dimension. The result is:

 
\frac{D \tilde{\tilde{u_{i}}}}{D \tilde{\tilde{t}}} = - \frac{\partial \tilde{\tilde{p}}}{\partial \tilde{\tilde{x_{i}}}} + \frac{1}{Re} \frac{\partial^{2} \tilde{\tilde{u_{i}}}}{\partial \tilde{\tilde{x_{i}}}}
(1)

where \tilde{\tilde{u_{i}}} \equiv u_{i}/U_{0}, \tilde{\tilde{x_{i}}} \equiv x_{i} / D, \tilde{\tilde{t}} \equiv U_{0} t / D and \tilde{\tilde{p}} \equiv p / \left( \rho U^{2}_{0} \right)  . The kinematic viscosity, \nu has disappeared entirely, and is included in the Reynolds number defined by:

 
Re \equiv \frac{U_{o} D}{\nu}
(2)

Now consider what happens as the Reynolds number increases, due to the increase of U_{o} or L, or even a decrease in the viscosity. Obviously the viscous terms become relatively less important. In fact, if the Reynolds number is large enough it is hard to see at first glance why any viscous term should be retained at all. Certainly in the limit as Re \rightarrow \infty, our equations must reduce to Euler’s equations which have no viscous terms at all; i.e., in dimensionless form,

 
\frac{D \tilde{u_{i}} }{ D \tilde{t} } = - \frac{\partial \tilde{p} }{\partial \tilde{x_{i}}}
(3)

Now if we replace the Navier-Stokes equations by Euler’s equations, this presents no problem at all in satisfying the kinematic boundary condition on the body’s surface. We simply solve for the inviscid flow by replacing the boundary of the body by a streamline. This automatically satisfies the kinematic boundary condition. If the flow can be assumed irrotational, then the problem reduces to a solution of Laplace’s equation, and powerful potential flow methods can be used.


In fact, for potential flow, it is possible to show that the flow is entirely determined by the normal velocity at the surface. And this is, of course, the source of our problem. There is no role left for the viscous no-slip boundary condition. And indeed, the potential flow has a tangential velocity along the surface streamline that is not zero. The problem, of course, is the absence of viscous terms in the Euler equations we used. Without viscous stresses acting near the wall to retard the flow, the solution cannot adjust itself to zero velocity at the wall. But how can viscosity enter the equations when our order-of-magnitude analysis says they are negligible at large Reynolds number, and exactly zero in the infinite Reynolds number limit. At the end of the nineteenth century, this was arguably the most serious problem confronting fluid mechanics.


Prandtl was the first to realize that there must be at least one viscous term in the problem to satisfy the no-slip condition. Therefore he postulated that the strain rate very near the surface would become as large as necessary to compensate for the vanishing effect of viscosity, so that at least one viscous term remained. This very thin region near the wall became known as Prandtl’s boundary layer, and the length scale characterizing the necessary gradient in velocity became known as the boundary layer “thickness”.

Prandtl’s argument for a laminar boundary layer can be quickly summarized using the same kind of order-of-magnitude analysis we used in Chapter 7 (here necessary make navigation !!!). For the leading viscous term:

 
\nu \frac{\partial^{2} u}{ \partial y^{2}}  \sim \nu \frac{U_{s}}{ \delta^{2}}
(4)

where \delta is the new length scale characterizing changes normal to the plate near the wall and we have assumed \Delta U_{s} = U_{s}. In fact, for a boundary layer next to walls driven by an external stream speed U_{\infty}. For the leading convection term:

 
U \frac{\partial U}{ \partial x} \sim \frac{ U^{2}_{s}}{L}
(5)

The viscous term can survive only if it is the same order of magnitude as the convection term. Hence it follows that we must have:

 
\nu \frac{U_{s}}{ \delta^{2}} \sim \frac{ U^{2}_{s}}{L}
(6)

This in turn requires that new length scale \delta must satisfy:

 
\delta  \sim \left[ \frac{\nu L}{U_{s}} \right]^{1/2}
(7)

or

 
\frac{\delta}{L} \sim \left[ \frac{\nu }{U_{s} L} \right]^{1/2}
(8)

Thus, for a laminar flow \delta grows like L^{1/2}. Now if you go back to your fluid mechanics texts and look at the similarity solution for a Blasius boundary layer, you will see this is exactly right if you take L \propto x, which is what we might have guessed anyway.

It is very important to remember that the momentum equation is a vector equation, and we therefore have to scale all components of this vector equation the same way to preserve its direction. Therefore we must carry out the same kind of estimates for the cross-stream momentum equations as well. For a laminar boundary layer this can be easily be shown to reduce to:

 
\left[ \frac{\delta}{L} \right] \left\{ \frac{ \partial \tilde{\tilde{ u}}}{ \partial \tilde{\tilde{t}}} + \tilde{\tilde{u}} \frac{\partial \tilde{\tilde{ u}} }{\tilde{\tilde{ x}}}+ \tilde{\tilde{v}} \frac{\partial \tilde{\tilde{ v}} }{\tilde{\tilde{ y}}}  \right\} = - \frac{  \partial \tilde{\tilde{p}}_{\infty}}{ \partial \tilde{\tilde{ y}} } + \frac{1}{Re} \left[ \frac{\delta}{L} \right] \left\{ \frac{ \partial^{2} \tilde{\tilde{v}} }{ \partial \tilde{\tilde{ y}}^{2}} \right\} + \frac{1}{Re} \left\{ \frac{ \partial^{2} \tilde{\tilde{v}} }{ \partial \tilde{\tilde{ x}}^{2}} \right\}
(9)


Note that a only single term survives in the limit as the Reynolds number goes to infinity, the cross-stream pressure gradient. Hence, for very large Reynolds number, the pressure gradient across the boundary layer equation is very small. Thus the pressure in the boundary is imposed on it by the flow outside the boundary layer. And this flow outside the boundary layer is governed to first order by Euler’s equation.


The fact that the pressure is imposed on the boundary layer provides us an easy way to calculate such a flow. First calculate the inviscid flow along the surface using Euler’s equation. Then use the pressure along the surface from this inviscid solution together with the boundary layer equation to calculate the boundary layer flow. If you wish, you can even use an iterative procedure where you recalculate the outside flow over a streamline which was been displaced from the body by the boundary layer displacement thickness, and then re-calculate the boundary layer, etc. Before modern computers, this was the only way to calculate the flow around an airfoil, for example.

The "outer" turbulent boundary layer

The understanding of turbulent boundary layers begins with exactly the same averaged equations we used for the free shear layers of Chapter 7(here necessary to add link!!!); namely,

x-component:

 
U \frac{\partial U}{ \partial x} + V \frac{\partial U}{ \partial y} = - \frac{1}{\rho} \frac{\partial P}{ \partial x} - \frac{\partial \left\langle u^{2} \right\rangle}{ \partial x} - \frac{\partial \left\langle uv \right\rangle}{ \partial y} + \nu \frac{ \partial^{2} U }{ \partial x^{2}} + \nu \frac{ \partial^{2} U }{ \partial y^{2}}
(10)

y-component:

 
U \frac{\partial V}{ \partial x} + V \frac{\partial V}{ \partial y} = - \frac{1}{\rho} \frac{\partial P}{ \partial y} - \frac{\partial \left\langle uv \right\rangle}{ \partial x} - \frac{\partial \left\langle u^{2} \right\rangle}{ \partial y} + \nu \frac{ \partial^{2} V }{ \partial x^{2}} + \nu \frac{ \partial^{2} V }{ \partial y^{2}}
(11)

two-dimensional mean continuity

 
\frac{\partial U}{ \partial x} + \frac{\partial V}{ \partial y} = 0
(12)

In fact, the order of magnitude analysis of the terms in this equation proceeds exactly the same as for free shear flows. If we take U_{s} = \Delta U_{s} = U_{\infty}, then the ultimate problem again reduces to how to keep a turbulence term. And, as before this requires:

 
\frac{\delta}{L} \sim \frac{u^{2}}{U_{s} \Delta U_{s}}
(00)


No problem, you say, we expected this. But the problem is that by requiring this be true, we also end up concluding that even the leading viscous term is also negligible! Recall that the leading viscous term is of order:

 
\frac{\nu}{U_{s} \delta} \frac{L}{\delta}
(13)

compared to the unity.

In fact to leading order, there are no viscous terms in either component of the momentum equation. In the limit as U_{\infty} \delta / \nu \rightarrow \infty, they are exactly the same as for the free shear flows we considered earlier; namely,

 
U \frac{\partial U}{ \partial x} + \left\{ V \frac{\partial U}{ \partial y} \right\} = -   \frac{1}{\rho} \frac{\partial P}{ \partial x} - \frac{\partial }{ \partial y} \left\langle uv  \right\rangle - \left\{ \frac{\partial }{ \partial x} \left\langle u^{2} \right\rangle \right\}
(14)

and

 
0 = - \frac{1}{\rho} \frac{\partial P}{ \partial y} - \frac{\partial }{ \partial y} \left\langle v^{2} \right\rangle
(15)


And like the free shear flows these can be integrated from the free stream to a given value of y to obtain a single equation:

 
U \frac{\partial U}{ \partial x} + V \frac{\partial U}{ \partial y} = - \frac{d P_{\infty}}{dx} - \frac{\partial }{ \partial y} \left\langle uv \right\rangle - \left\{ \frac{\partial}{\partial x} \left[ \left\langle u^{2} \right\rangle - \left\langle v^{2}  \right\rangle \right] \right\}
(16)

The last term in brackets is the gradient of the difference in the normal Reynolds stresses, and is of order u^2 / U^2 compared to the others, so is usually just ignored. The bottom line here is that even though we have attempted to carry out an order of magnitude analysis for a boundary layer, we have ended up with exactly the equations for a free shear layer. Only the boundary conditions are different— most notably the kinematic and no-slip conditions at the wall. Obviously, even though we have equations that describe a turbulent boundary layer, we cannot satisfy the no-slip condition without a viscous term. In other words, we are right back where we were before Prandtl invented the boundary layer for laminar flow! We need a boundary layer within the boundary layer to satisfy the no-slip condition. In the next section we shall in fact show that such an inner boundary layer exists. And that everything we analysed in this section applies only to the outer boundary layer — which is NOT to be confused with the outer flow which is non-turbulent and still governed by Euler’s equation. Note that the presence of P_{\infty} in our outer boundary equations means that (to first order in the turbulence intensity), the pressure is still imposed on the boundary layer by the flow outside it, exactly as for laminar boundary layers (and all free shear flows, for that matter).

The “inner” turbulent boundary layer

We know that we cannot satisfy the no-slip condition unless we can figure out how to keep a viscous term in the governing equations. And we know there can be such a term only if the mean velocity near the wall changes rapidly enough so that it remains, no matter how small the viscosity becomes. In other words, we need a length scale for changes in the y-direction very near the wall which enables us keep a viscous term in our equations. This new length scale, let’s call it \eta, is going to be much smaller than \delta, the boundary layer thickness. But how much smaller?


Obviously we need to go back and look at the full equations again, and re-scale them for the near wall region. To do this, we need to first decide how the mean and turbulence velocities scale near the wall scale. We are clearly so close to the wall and the velocity has dropped so much (because of the no-slip condition) that it makes no sense to characterize anything by U_{\infty}. But we don’t have anyway of knowing yet what this scale should be, so let’s just call it u_{w} and define it later. Also, we do know from experiment that the turbulence intensity near the wall is relatively high (30% or more). So there is no point in distinguishing between a turbulence scale and the mean velocity, we can just use u_{w} for both. Finally we will still use L to characterize changes in the x-direction, since these will vary no more rapidly than in the outer boundary layer above this very near wall region we are interested in.

For the complete x-momentum equation we estimate

 
\begin{matrix}
U \frac{\partial U}{ \partial x} & + & V \frac{ \partial U}{ \partial y} \\
u_{w} \frac{u_{w}}{L} & & \left( u_{w} \frac{\eta}{L} \right) \frac{u_{w}}{\eta} \\
\end{matrix}
(00)
 
\begin{matrix}
= & - \frac{1}{\rho} \frac{\partial P}{ \partial x} & - & \frac{\partial \left\langle u^{2}  \right\rangle}{\partial x} & - & \frac{\partial \left\langle uv   \right\rangle}{\partial y} & + & \nu \frac{ \partial^{2} U }{ \partial x^{2}} & + & \nu \frac{ \partial^{2} U }{ \partial y^{2}} \\
& ? & & \frac{u^{2}_{w}}{\eta} & & \frac{u^{2}_{w}}{L} & & \nu \frac{u_{w}}{L^{2}} & & \nu \frac{u_{w}}{\eta^{2}} \\
\end{matrix}
(00)


where we have used the continuity equation to estimate V \sim u_{w} \eta / L near the wall.

Now as always, we have to decide which terms we have to keep so we know what to compare the others with. But that is easy here, we MUST insist that at least one viscous term survive. Since the largest is of order \nu u_{w} / \eta^{2} , we can divide by it to obtain:

 
\begin{matrix}
U \frac{\partial U}{ \partial x} & + & V \frac{ \partial U}{ \partial y} \\
\left( \frac{u_{w} \eta }{ \nu } \right) \frac{\eta}{L} & & \left( \frac{u_{w} \eta }{ \nu } \right) \frac{\eta}{L}
\end{matrix}
(00)
 
\begin{matrix}
= & - \frac{1}{\rho} \frac{\partial P}{ \partial x} & - & \frac{\partial \left\langle u^{2}  \right\rangle}{\partial x} & - & \frac{\partial \left\langle uv   \right\rangle}{\partial y} & + & \nu \frac{ \partial^{2} U }{ \partial x^{2}} & + & \nu \frac{ \partial^{2} U }{ \partial y^{2}} \\
& ? & & \left( \frac{u_{w} \eta }{ \nu } \right) \frac{\eta}{L} & & \frac{u_{u} \eta}{\nu} & & \frac{\eta^{2}}{L^{2}} & & 1 \\
\end{matrix}
(00)

Now we have an interesting problem. We have the power to whether the Reynolds shear stress term survives or not by our choice of \eta; i.e. we can pick u_{w} \eta / \nu \sim 1 or u_{w} \eta / \nu \rightarrow 0. Note that we can not choose it so this term blows up, or else our viscous term will not be at least equal to the leading term. The most general choice is to pick \eta \sim \nu / u_{w} so the Reynolds shear stress remains too. (This is called the distinguished limit in asymptotic analysis.) By making this choice we eliminate the necessity of having to go back and find there is another layer in which only the Reynolds stress survives — as we shall see below. Obviously if we choose \eta \sim \nu / u_{w} , then all the other terms vanish, except for the viscous one. In fact, if we apply the same kind of analysis to the y-mean momentum equation, we can show that the pressure in our near wall layer is also imposed from the outside. Moreover, even the streamwise pressure gradient disappears in the limit as u_{w} \eta / \nu \rightarrow \infty. These are relatively easy to show and left as exercises.

So to first order in \eta / L \sim \nu / \left( u_{w} L \right), our mean momentum equation for the near wall region reduces to:

 
0 \approx \frac{\partial}{\partial y}  \left[ - \left\langle uv \right\rangle + \nu \frac{\partial U}{ \partial y} \right]
(17)

In fact, this equation is exact in the limit as u_{w} \delta / \nu \rightarrow \infty, but only for the very near wall region!

Equation (17) can be integrated from the wall to location y to obtain:

 
0 = - \left\{ \left\langle uv \right\rangle - \left\langle uv \right\rangle |_{y=0} \right\}  + \nu \left\{ \frac{\partial U}{ \partial y} - \frac{\partial U}{ \partial y} \bigg|_{y=0} \right\}
(18)

From the kinematic and no-slip boundary conditions at the wall we immediately know that \left\langle uv \right\rangle |_{y=0} \equiv 0. We also know that the wall shear stress is given by:

 
\tau_{w} \equiv \mu \frac{\partial U}{ \partial y} \bigg|_{y=0}
(19)


Substituting this we obtain our equation for the very near wall (in the limit of infinite Reynolds number) as:

 
\frac{\tau_{w}}{\rho} = - \left\langle uv \right\rangle + \nu \frac{\partial U}{ \partial y}
(20)

We immediately recognize one of the most important ideas in the history of boundary layer theory; namely that in the limit of infinite Reynolds number the total stress in the wall layer is constant. Not surprisingly, the wall layer is referred to quite properly as the Constant Stress Layer. It is important not to forget (as many who work in this field do) that this result is valid only in the limit of infinite Reynolds number. At finite Reynolds numbers the total stress is almost constant, but never quite so because of the terms we have neglected. This difference may seem slight, but it can make all the difference in the world if you are trying to build an asymptotically correct theory, or even just understand your experiments.

Before leaving this section we need to resolve the important questions of what is u_{w}, our inner velocity scale. It is customary to define something called the friction velocity, usually denoted as u_{*}, by:

u2 � � �w � (8.21) Now using this, equation 8.20 can be rewritten as: u2 � = − < uv > +� @U @y (8.22) It should be immediately obvious that the choice is uw = u�; in other words, the friction velocity is the appropriate scale velocity for the wall region. It follows immediately from our considerations above that the inner length scale is � = �/u�.


An interesting consequence of these choices is that the inner Reynolds number is unity; i.e., u��/� = 1, meaning that viscous and inertial terms are about the same. But then this is precisely why we defined � as we did in the first place — to ensure that viscosity was important.


It is important not to read too much into the appearance of the wall shear stress in our scale velocity. In particular, it is wrong to think that it is the shear stress that determines the boundary layer. In fact, it is just the opposite: the outer boundary layer determines the shear stress. If you have trouble seeing this, just turn off the outer flow and the boundary layer disappears. The wall shear stress appears in the scale velocity only because of the constant stress layer which changes the Reynolds stress imposed by the outer flow into the viscous stress on the wall.


Finally we can use our new length scale to define where we are in this near wall layer. In fact, we can introduce a whole new dimensionless coordinate called y+ defined as: y+ � y � = yu� � (8.23)

When moments of the velocity field, for example, are normalized by u� (to the appropriate power) and plotted as functions of y+, they are said to be plotted in “inner” variables. Similarly, we can non-dimensionalize equation 8.20 using inner variables and rewrite it as simply:

1 = ri + dfi dy+ (8.24)

where if we suppress for the moment a possible x-dependence we can write: fi(y+) � U(x, y) u� (8.25) and ri(y+) � − < uv > u2 � (8.26)

By contrast an “outer” dimensionless coordinate, y, is defined by:

y = y � (8.27)

In terms of these coordinates the outer equations (for the mean flow) are generally considered valid outside of y+ = 30 or so. And the inner equations are needed inside of y = 0.1 if we take � = �0.99. �0.99 is defined to be equal to the value of y at which the mean velocity in the boundary layer is 0.99% of its free stream value, U1.

It is easy to see that the ratio of y+ to y is the local Reynolds number �+ where + = u� � (8.28)

Obviously the higher the value of �+, the closer the inner layer will be to the wall relative to �. On the other hand, since the wall friction (and hence u�) drops with increasing distance downstream, both the outer boundary layer and inner boundary grow in physical variables (i.e., the value of y marking their outer edge increases). Sorting all these things out can be very confusing, so it is very important to keep straight whether you are talking about inner, outer or physical variables.

The viscous sublayer

My wiki