The area of a constrained plane section

siara817 · January 25, 2013, 05:11

I need to determine the area magnitude of two plane sections. I have generated a report for the area magnitude of these two constrained plane sections. STAR CCM gives the area magnitude of one of them. For the other, it shows zero.
What to do to get the area magnitude of other one?

virgy · February 20, 2013, 12:56

Which report type did you use? For example, with "frontal area" report the problem could be setting the right "view up" and "normal" properties.

olauer · February 27, 2013, 07:24

You could create a field function with a constant value 1 and do a surface integral for the constrained plane for this field function

January 25, 2013, 05:11	The area of a constrained plane section	#1
siara817 Senior Member siamak rahimi ardkapan Join Date: Jul 2010 Location: Copenhagen, Denmark Posts: 220 Rep Power: 18	I need to determine the area magnitude of two plane sections. I have generated a report for the area magnitude of these two constrained plane sections. STAR CCM gives the area magnitude of one of them. For the other, it shows zero. What to do to get the area magnitude of other one? __________________ Good luck Siamak

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] converting Fluent mesh to openfoam standard mesh	deepesh	OpenFOAM Meshing & Mesh Conversion	31	March 29, 2017 06:59
dsmcInitialise - dsmcFoam	archymedes	OpenFOAM Pre-Processing	94	July 15, 2016 17:14
[Gmsh] Problem with Gmsh	nishant_hull	OpenFOAM Meshing & Mesh Conversion	23	August 5, 2015 03:09
CFX Solver Memory Error	mike	CFX	1	March 19, 2008 08:22
Cross section and surface area factor	Fabiana	CFX	0	January 10, 2006 00:51

February 20, 2013, 12:56		#2
virgy New Member Join Date: Apr 2011 Location: Italy Posts: 9 Rep Power: 15	Which report type did you use? For example, with "frontal area" report the problem could be setting the right "view up" and "normal" properties.

February 27, 2013, 07:24		#3
olauer Member Oliver Lauer Join Date: Mar 2009 Location: Coburg Posts: 57 Rep Power: 17	You could create a field function with a constant value 1 and do a surface integral for the constrained plane for this field function