[farhagim]

Hello guys,

I am new user in OpenFoam. I need to import the Gambit file or Fluent mesh to OpenFoam. I used the fluentMeshToFoam & gambitToFoam command , but I got this error. Can anybody help me?
To be clear, I save the .msh & neu file in ASCI format. but I have some interior boundary ( not interior wall...I used it for making the Mesh). Is it problem? does OF know the interior boundary....I dont want OF to convert it to wall boundary.


/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.6 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.6-f802ff2d6c5a
Exec : gambitToFoam test2.neu
Date : May 28 2010
Time : 13:34:06
Host : ip11
PID : 28755
Case : /home/farhangi/OpenFOAM/farhangi-1.6/run/tutorials/multiphase/interFoam/laminar/test
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time


Title: test2
Written by Gambit version 2.4.6

File written on 27 May 2010 16:36:04
number of points: 5100
number of cells: 5000
number of patches: 1
Reading nodal coordinates
Reading cells

Reading cell streams
Reading cell stream labels
Finished reading cell stream labels
Reading patches
patch 0: name: wall
Finished lexing
#0 Foam::error:rintStack(Foam::Ostream&) in "/home/farhangi/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::sigSegv::sigSegvHandler(int) in "/home/farhangi/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 __restore_rt at sigaction.c:0
#3 main in "/home/farhangi/OpenFOAM/OpenFOAM-1.6/applications/bin/linux64GccDPOpt/gambitToFoam"
#4 __libc_start_main in "/lib64/libc.so.6"
#5 _start at /usr/src/packages/BUILD/glibc-2.9/csu/../sysdeps/x86_64/elf/start.S:116
Segmentation fault


PlZ Help me.

thanks

[jignesh_thaker2007]

Hello Friends

I m new user of openfoam so i solved tutorial of OF. now i m trying to solve complicated problem. so the geometry is very difficult to construct in OF. so far i use gambit for making geometry.
Right now i construct geometry in gambit & also I completed mesh in Gambit so now for processing & post processing i use OF. but i m in trouble how to convert .msh file of gambit in OF format?

Which command will i use? gabitToFoam or FluentMeshToFoam?
so please help me to solve this problem.
i m waiting 4 ur reply

[elvis]

What about fluent3DMeshToFoam ?
I have no personal experience (sorry), but maybe fluent3DMeshToFoam is the better solution to convert your .msh to Openfoam.

If I am not wrong fluent3DMeshToFoam is the latest devoloped converter

[-mAx-]

if you don't generate a mesh with hanging nodes (tetra-hexcore), then you can use fluentMeshToFoam
if you generate a mesh with hanging nodes (tetra-hexcore), you need to convert some cells with utility tpoly (not OF utilty, but Fluent utility), then you can use fluent3DMeshToFoam

[jignesh_thaker2007]

hi
i m new user of openfoam201 i phase one difficulty when i solved cavity tutorials then i cant found such like fluent after achieving conversion limit, the program didn't stop. but when it reach end time it stop.

but i want to stop my program when it go beyond the conversion limit so what can i do for that?

plz help me