Display problem in Ansys fluent 17.1

poutivar · January 4, 2018, 11:42

Hey everyone.
Hi there.
I would like to ask if someone knows how to bring back the down bar of fluent (I used to find it in verion 16 but no longer 17.1, see pictures) is it just a matter of display o it does no longer exist ? if so, ho can I integrate the Crank angle in my animation or image captures.
Thanks

annan · January 5, 2018, 06:23

Hello

Try to go to the viewing tab in Fluent, then in the "display" category click on "options", and finally in layout tick the "titles" box and click on apply. Normally you should get what you're looking for.

Hope this will help.
Good luck

poutivar · January 17, 2018, 11:44

Definitely ...Thank you very much

January 5, 2018, 06:23		#2
annan Member annan Join Date: Nov 2016 Posts: 72 Rep Power: 10	Hello Try to go to the viewing tab in Fluent, then in the "display" category click on "options", and finally in layout tick the "titles" box and click on apply. Normally you should get what you're looking for. Hope this will help. Good luck poutivar likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with building 3ddp UDF in Ansys FLUENT 16.2	SPH_CFD	Fluent UDF and Scheme Programming	1	July 20, 2016 05:08
ansys fluent v16.0 :problem whit resume calculation and automatic export file	ca3tiel	FLUENT	0	May 29, 2016 20:08
The fluent stopped and errors with "Emergency: received SIGHUP signal"	yuyuxuan	FLUENT	0	December 3, 2013 23:56
problem in using parallel process in fluent 14	aydinkabir88	FLUENT	1	July 10, 2013 03:00
ANSYS Fluent 14.0, dimension problem?	SteveFinnan	ANSYS	2	June 14, 2013 10:12

January 17, 2018, 11:44		#3
poutivar New Member adam Join Date: Mar 2015 Posts: 18 Rep Power: 11	Definitely ...Thank you very much