|
[Sponsors] |
June 4, 2019, 07:08 |
Injection with bundary or region
|
#1 |
New Member
Join Date: Apr 2019
Posts: 5
Rep Power: 7 |
Hi everyone, im wondering how i can realize the injection function on my CFD model with boundary or region definition, cuz my injector dosent have a real nozzel its more like a inflow-channel. Are there any Suggetions from u? Thanks in advance!
|
|
June 4, 2019, 16:11 |
|
#2 |
Member
Yanheng Li
Join Date: Jan 2016
Location: Convergent Science, Madison WI
Posts: 33
Rep Power: 10 |
Hi, are you using spray modeling or Eulerian modeling of the spray?
|
|
June 4, 2019, 17:08 |
|
#3 |
New Member
Join Date: Apr 2019
Posts: 5
Rep Power: 7 |
Thank u for ur reply Yanheng! I have used spray modeling. But collegue told me that there is no actual spray with my model and I shouldnt use spray modeling. Cuz the opening of the injector is like intake and exhaust channel Its actuallyalso a small injecting channel. so the fuel will not be "pulverized" like the real spray. Thats why i dont know how i can realize such a Injection. Thank u again!
|
|
June 4, 2019, 18:10 |
|
#4 |
Member
Yanheng Li
Join Date: Jan 2016
Location: Convergent Science, Madison WI
Posts: 33
Rep Power: 10 |
Hi, if you are going to use the Eulerian approach, then turn off spray modeling, and turn on VOF modeling if there is also gas phase existing. You can just set the orifice as a "Inflow" boundary with a mass-flow boundary condition, and you can check the "use file" option in Studio and provide the temporal injection rate profile.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Maximum number of iterations exceeded chtmultiregionsimpleFoam | Moncef | OpenFOAM Running, Solving & CFD | 28 | July 13, 2020 14:26 |
conjugate heat transfer in OpenFOAM | skuznet | OpenFOAM Running, Solving & CFD | 99 | March 16, 2017 05:07 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
Porous Region within Open Air "Wind Tunnel" Region Interfacing | pkirchner | STAR-CCM+ | 10 | March 27, 2014 19:10 |
PRE: Particle Injection Region as f(temperature) | Daniel | CFX | 0 | February 19, 2009 16:09 |