ANSYS closing during work

Nickolay · September 9, 2015, 05:52

Hi there !

We use installed version of ANSYS 16.0 in our University Computer Lab.

Unfortunately we encounter one serious issue:

During work at night the PC closes down every ANSYS module incl. the Solver.

Electricity break-down can't be the reason as we find all other files (like Excel tables) still open.

The work becomes less efficient because there's time when the PC don't do any calculations.

I was wondering if any of you had such issue with ANSYS 16.0.

The PC that we use has following parameters:
The Processor is Intel Xeon CPU E5-2603 v3 1.60 GHz
Installed memory: 128 GB
System type: 64-bit Operating System

I would be extremely grateful for any suggestions.

Nickolay · October 9, 2015, 07:01

Homehow... the issue resolved from itself.

PC is used again on maximum CPU and the calculations run without this issue anymore.

September 9, 2015, 05:52	ANSYS closing during work	#1
Nickolay New Member Nickolay Join Date: Feb 2014 Posts: 11 Rep Power: 12	Hi there ! We use installed version of ANSYS 16.0 in our University Computer Lab. Unfortunately we encounter one serious issue: During work at night the PC closes down every ANSYS module incl. the Solver. Electricity break-down can't be the reason as we find all other files (like Excel tables) still open. The work becomes less efficient because there's time when the PC don't do any calculations. I was wondering if any of you had such issue with ANSYS 16.0. The PC that we use has following parameters: The Processor is Intel Xeon CPU E5-2603 v3 1.60 GHz Installed memory: 128 GB System type: 64-bit Operating System I would be extremely grateful for any suggestions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Companies that lease software & hardware for cloud-based work?	Catthan	ANSYS	0	June 18, 2014 11:53
How to model concrete slab in ANSYS and apply 2 million cyclic load.	jjc	ANSYS	3	April 12, 2011 05:47
[ANSYS Meshing] Ansys meshing with extended meshing	jsm	ANSYS Meshing & Geometry	6	January 10, 2011 13:09
Ansys installation on VISTA 32/64 bit sol'n!	Andrzej F	CFX	0	September 22, 2008 17:51
Exporting results from CFX to ANSYS ??	sohail ahmed	CFX	1	December 20, 2007 02:10

October 9, 2015, 07:01		#2
Nickolay New Member Nickolay Join Date: Feb 2014 Posts: 11 Rep Power: 12	Homehow... the issue resolved from itself. PC is used again on maximum CPU and the calculations run without this issue anymore.