Page 2 of 2
<
1
2
Show 40 post(s) from this thread on one page
CFD Online Discussion Forums
(
https://www.cfd-online.com/Forums/
)
-
ANSYS Meshing & Geometry
(
https://www.cfd-online.com/Forums/ansys-meshing/
)
- - [ANSYS Meshing]
Problem with Inflation Descreasing Mesh Quality
(
https://www.cfd-online.com/Forums/ansys-meshing/178853-problem-inflation-descreasing-mesh-quality.html
)
Alamu
March 4, 2019 03:29
In which type of problem are you working in 2d or 3d.
If you are 3d slicing in fluent geometry, name the interfaces, so that it could be identified in CFX.
Thanks.
All times are GMT -4. The time now is
23:27
.
Page 2 of 2
<
1
2
Show 40 post(s) from this thread on one page
