[ICEM] Blocking Strategy For a simple Box

Tarantino · February 2, 2013, 11:53

Hello

I am new in this forum and quite new with ICEM.
I blocked the enclose geometry in different ways, but I can not achieve a good quality! the Box has two circle outlet and the geometry is really simple. As I saw there are so many expert people here in ICEM meshing which is of course this is really simple and easy for them to mesh, I am kindly ask to offer me the best blocking strategy for this geometry types. As I saw that the members asking to enclose the geometry in order to help better, you can download the geometry below.
Many thank all of you who will help me.

Geometry Download: 60 KB

http://www.uploadmb.com/dw.php?id=1359820013

diamondx · February 2, 2013, 12:45

I don't have pc right now, but this a very basic geometry here are the step to do a nice blocking:

1- create an initial block.
2- create an ogrid inside the block you created in step 1. you have to select the bottom face (ground) to when creating the o-grid. (Because the two shares the same face)
3- make the splits to capture the circles, don't forget to add o-grid inside those because of the circular shape. Come back here if you still found it difficult, i will remotely connect to my pc in lab and help you do it.

Far · February 2, 2013, 13:23

Simple Box <---> Simple blocking .

Tarantino · February 2, 2013, 17:58

Hello and thanks for your sample block.
Do you see the quality and scan plane of the mesh!

why you add some curves to the geometry? to assign theses curves for your o-grid? Is there any way that the o-grid don't go along the hole geometry? when we have no any cicle hole in the other wall, then why o-grid should go throw the hole walls?

anyway, thanks for your time.
I am looking for an intelligent block strategy to avoid cutting hole the blocks in so many peaces!

Far · February 2, 2013, 18:11

Quote:

Do you see the quality and scan plane of the mesh!

Yes and you need to set the edge shape through edit edge commands. You have to do it if you need perfect mesh

.

Quote:

why you add some curves to the geometry? to assign theses curves for your o-grid?

Yes

Quote:

Is there any way that the o-grid don't go along the hole geometry? when we have no any cicle hole in the other wall, then why o-grid should go throw the hole walls?

Why not? There is no effect of extending blocking to other wall. It is not going to change the boundary conditions there so no worry.

Quote:

I am looking for an intelligent block strategy to avoid cutting hole the blocks in so many peaces!

I would love to see other methods with smart blocking. Please do share it...

Tarantino · February 2, 2013, 18:26

Hello.

How can I use the Edge edit command to improve the quality in this case?!
could you please let me more.

It would be great, if others share ideas about the blocking.

asal · February 3, 2013, 09:15

Try this one!

http://www.uploadmb.com/dw.php?id5

February 2, 2013, 11:53	Blocking Strategy For a simple Box	#1
Tarantino Member Tarantino Join Date: Feb 2013 Posts: 46 Rep Power: 13	Hello I am new in this forum and quite new with ICEM. I blocked the enclose geometry in different ways, but I can not achieve a good quality! the Box has two circle outlet and the geometry is really simple. As I saw there are so many expert people here in ICEM meshing which is of course this is really simple and easy for them to mesh, I am kindly ask to offer me the best blocking strategy for this geometry types. As I saw that the members asking to enclose the geometry in order to help better, you can download the geometry below. Many thank all of you who will help me. Geometry Download: 60 KB http://www.uploadmb.com/dw.php?id=1359820013

February 2, 2013, 12:45		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	I don't have pc right now, but this a very basic geometry here are the step to do a nice blocking: 1- create an initial block. 2- create an ogrid inside the block you created in step 1. you have to select the bottom face (ground) to when creating the o-grid. (Because the two shares the same face) 3- make the splits to capture the circles, don't forget to add o-grid inside those because of the circular shape. Come back here if you still found it difficult, i will remotely connect to my pc in lab and help you do it. asal, amin_gls and Tarantino like this. __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

February 3, 2013, 09:15		#7
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 14	Try this one! http://www.uploadmb.com/dw.php?id5 Last edited by asal; February 23, 2013 at 11:56.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] o grid blocking strategy?	icemaniac178	ANSYS Meshing & Geometry	14	March 20, 2013 00:18
[ICEM] Blocking strategy ICEM	krembil	ANSYS Meshing & Geometry	9	November 23, 2012 06:49
[ICEM] Complicated geometry blocking strategy	sidd	ANSYS Meshing & Geometry	1	October 3, 2012 14:34
[ICEM] Advice on a blocking strategy	pipolaki	ANSYS Meshing & Geometry	13	July 23, 2012 18:46
[ICEM] Blocking strategy for inclined plate	cbisw	ANSYS Meshing & Geometry	3	May 27, 2011 09:17

February 2, 2013, 17:58		#4
Tarantino Member Tarantino Join Date: Feb 2013 Posts: 46 Rep Power: 13	Hello and thanks for your sample block. Do you see the quality and scan plane of the mesh! why you add some curves to the geometry? to assign theses curves for your o-grid? Is there any way that the o-grid don't go along the hole geometry? when we have no any cicle hole in the other wall, then why o-grid should go throw the hole walls? anyway, thanks for your time. I am looking for an intelligent block strategy to avoid cutting hole the blocks in so many peaces!

February 2, 2013, 18:26		#6
Tarantino Member Tarantino Join Date: Feb 2013 Posts: 46 Rep Power: 13	Hello. How can I use the Edge edit command to improve the quality in this case?! could you please let me more. It would be great, if others share ideas about the blocking.