[aerothermal]

I have it in the newest version, however, I discovered that I have more than one qmake in /usr/bin directory..

/usr/bin$ ls qmake*
qmake qmake-qt3 qmake-qt4
/usr/bin$qmake-qt4 --version
QMake version 2.01a
Using Qt version 4.6.2 in /usr/lib
/usr/bin$ qmake-qt3 --version
Qmake version: 1.07a (Qt 3.3.8b)
Qmake is free software from Trolltech ASA.

so I configured qmake and selected qmake-at4 to be qmake:

$sudo update-alternatives --config qmake

let see what happens...

I appreciated your help! The compilation is running...

[pcaron]

Hi David!

Do you know how to enable Paraview to use MPI. I asked this questions in the following thread but I didn't get any reply.

http://www.cfd-online.com/Forums/ope...compiling.html

Thanks in advance.

Pablo

[boger]

Sorry - I haven't looked at that.

[Arnoldinho]

Originally Posted by david

Hi Martin

It's Ubuntu 10.04. Everything compiles and paraview runs fine but there seems to be a problem with the reader. I get the following error if I open a case:

david@freitag:~/OpenFOAM/david-1.6-ext/run/tutorials/incompressible/simpleFoam/pitzDaily$ paraFoam
created temporary 'pitzDaily.OpenFOAM'
ERROR: In /home/david/OpenFOAM/OpenFOAM-1.6-ext/ThirdParty/rpmBuild/BUILD/ParaView-3.8.1/Servers/Common/vtkProcessModule.cxx, line 1065
vtkProcessModule (0x19e6830): Object type: vtkPV3FoamReader, could not find requested method: "SetRefresh"
or the method was called with incorrect arguments.

while processing
Message 1 = Invoke
Argument 0 = id_value {114}
Argument 1 = string_value {SetRefresh}
Argument 2 = int32_value {0}

David,

did you solve this problem? I'm asking because I get the same error now after compiling OF 1.6-ext...

EDIT: Sorry, my fault or better: I did not read the whole post. #11 solved it.

Arne

[JNSN]

Hi everybody,

just want to inform that some urls in the allmake scripts of the third party are out of date:

In Allmake.stage1 it should be changed to
http://www.mpfr.org/mpfr-3.0.0/mpfr-3.0.0.tar.gz

and in Allmake.stage3 in
http://glaros.dtc.umn.edu/gkhome/fet...5.0pre2.tar.gz

Best wishes,
Jan

[mbeaudoin]

Please use the OpenFOAM-extend Bugtracking system to report OpenFOAM-extend related problems.

http://sourceforge.net/apps/mantisbt..._view_page.php

Martin

Originally Posted by JNSN

Hi everybody,

just want to inform that some urls in the allmake scripts of the third party are out of date:

In Allmake.stage1 it should be changed to
http://www.mpfr.org/mpfr-3.0.0/mpfr-3.0.0.tar.gz

and in Allmake.stage3 in
http://glaros.dtc.umn.edu/gkhome/fet...5.0pre2.tar.gz

Best wishes,
Jan

[JNSN]

Originally Posted by mbeaudoin

Please use the OpenFOAM-extend Bugtracking system to report OpenFOAM-extend related problems.

http://sourceforge.net/apps/mantisbt..._view_page.php

Martin

... Done!

Jan