[Xye]

Originally Posted by akidess

It's ok, no errors.

Great.

Can't seem to get the tutorials to work though. Not sure if its anything to do with the $FOAM_RUN part of the command that it tells you to do Here

[akidess]

Originally Posted by Xye

Can't seem to get the tutorials to work though. Not sure if its anything to do with the $FOAM_RUN part of the command that it tells you to do Here

It would help if you told us what the problems are you are having.

[wenc2]

Hello,

Thanks for the script it's a great help. It solved most of the error I had. Still got one so. It looks like it's with "icoFoam"
If some now how to solve it It would be wonderfull

Third party software
-------------------------------------------------------------------------------
Software Version   Location 
-------------------------------------------------------------------------------
gcc      4.3.3     ...OAM/ThirdParty-1.6.x/gcc-4.3.3/platforms/linux/bin/gcc
gzip     1.3.12    /bin/gzip                                                
tar      1.20      /bin/tar                                                 
icoFoam           
WARNING:  Conflicting installations:
          OpenFOAM settings        : /home/wenceslas/OpenFOAM/OpenFOAM-1.6.x/applications/bin/linuxGccDPOpt/icoFoam
          current path             : 
          CRITICAL ERROR

[af631717]

Hi,

i often used the skript and it always worked well even with Debian 5. But on one computer the following error message comes:

gcc -m32 -Wall -O3 -fPIC dirToString.c -o /home/timo/OpenFOAM/OpenFOAM-1.6.x/wmake/bin/linuxGcc/dirToString
flex wmkdep.l
gcc -m32 -Wall -O3 -fPIC lex.yy.c -o /home/timo/OpenFOAM/OpenFOAM-1.6.x/wmake/bin/linuxGcc/wmkdep
lex.yy.c:1393: warning: ‘yyunput’ defined but not used
lex.yy.c:1436: warning: ‘input’ defined but not used
wmkdep.l: In function ‘yy_scan_bytes’:
wmkdep.l:463: internal compiler error: Ungültiger Maschinenbefehl
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
make: *** [/home/timo/OpenFOAM/OpenFOAM-1.6.x/wmake/bin/linuxGcc/wmkdep] Fehler 1
++ '[' -n '' ']'
++ '[' -n '' ']'
++ '[' -n '' ']'
++ '[' -n '' ']'
++ '[' -n '' ']'
++ cd malloc
++ ./Allwmake
+ wmake libso hoard
/bin/sh: /home/timo/OpenFOAM/OpenFOAM-1.6.x/wmake/bin/linuxGcc/wmkdep: Datei oder Verzeichnis nicht gefunden

Any hints?
A.

[akidess]

Achim, from what google tells me you might have a problem with your RAM.

[af631717]

Anton; thanks - will change the RAM
Achim

[MadsR]

Hi.

From the suggestions of Bruno above (thanks, man), I have changed the scripts to support Ubuntu 9.10. Actually I have scripts now for 9.04 and 9.10 separately (link in my signature).

I have just installed a fresh Ubuntu 9.10 64-bit from scratch and used the new scripts and they worked. Please let me know about any issues you might have, and I will upgrade.

/Mads

[83_Ale_83]

Hello guys,

I am a newbee of OpenFOAM, i am trying to install it on Ubuntu 9.10 x64 with the script, but when I type in terminal

cd OpenFOAM-1.6.x/
. ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc

The terminal close itself, if I re-open the terminal I got this message:

bash: /home/ale/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc: Nessun file o directory

Which is the problem?
With rRegards
Alessandro

[MadsR]

Hi Alessandro.

We might a bit more info. Is it a fresh install of 9.10? Is it when the script executes bashrc or when you (why?) do it? It should be added automatically to your .bashrc file so there shouldn't be any need for you executing it yourself.

/Mads

[83_Ale_83]

It's not proper a fresh installation of Ubuntu 9.10 (I have update it and install the driver of my quadro video card and uninstall some useless programs (the gimp in example).

It happen when I copy-paste the script from your file to my terminal.

Maybe I have to reinstall a fresh ubuntu installation and the try, If could be usefull I have a dual boot system xp/9.10 and for 9.10 3 partitions: /,/home and swap.

Thank you
Alessandro

[MadsR]

What if you write (just to check if the installation is where it should be, and the bashrc of OpenFOAM is present):

ls ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc

/Mads

[af631717]

Hi,
on my netbook i used the old script and it worked!
Is it necessary to use the other libs?

The skript worked for Debian 5. Only the paraFoam does not work!

When you use the precompiled version with Lenny (Debian 5) then everything ist fine, but when you compile the 1.6.x, paraFoam does not work anymore - when you compile paraFoam again, it also does not work - strange!
A.

[MadsR]

Hi Achim.

Interesting. A couple of questions:

1) so the old script worked with Ubuntu 9.10?
2) was it the 32-bit version?
3) you mention Debian 5, what script did you use and did you experience other problems than the one with paraFoam?
4) do you have any error output from paraFoam?

/Mads

[83_Ale_83]

Originally Posted by MadsR

What if you write (just to check if the installation is where it should be, and the bashrc of OpenFOAM is present):

ls ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc

/Mads

This is what the terminal show:

walk 7df9c9e09d67e226d1a409ef2dd141203701924f
walk b21a55baed3309240f84f3fc0ea91e5e41cd7277
ale@alien:~/OpenFOAM/ThirdParty-1.6/gcc-4.3.3/platforms/linux64/lib64$ cd OpenFOAM-1.6.x/
ale@alien:~/OpenFOAM/ThirdParty-1.6/gcc-4.3.3/platforms/linux64/lib64/OpenFOAM-1.6.x$ . ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc
bash: /home/ale/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc: Nessun file o directory
ale@alien:~/OpenFOAM/ThirdParty-1.6/gcc-4.3.3/platforms/linux64/lib64/OpenFOAM-1.6.x$ ls ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc
ls: impossibile accedere a /home/ale/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc: Nessun file o directory
ale@alien:~/OpenFOAM/ThirdParty-1.6/gcc-4.3.3/platforms/linux64/lib64/OpenFOAM-1.6.x$

[MadsR]

Alessandro,

Wierd. It seems that you don't have the bashrc of OpenFOAM available at all...?

Show us the output of the following commands:

1. ls ~/OpenFOAM
2. ls ~/OpenFOAM/OpenFOAM-1.6.x
3. ls ~/OpenFOAM/OpenFOAM-1.6.x/etc

/Mads

[af631717]

Hi Mads

1) so the old script worked with Ubuntu 9.10?
yes, Acer Aspire Netbook with Remix Ubuntu 9.10 (Remix is especially for the netbook - only adapted GUI for the small LCD and Wireless Lan etc. All other things should be the same. Works perfect. Also ParaFoam works with a proper performance.

2) was it the 32-bit version?
Intel Atom

3) you mention Debian 5, what script did you use and did you experience other problems than the one with paraFoam?
Only paraFoam Reader has problems, compiling the 1.6.x was correct and work proberly.

4) do you have any error output from paraFoam?
It looks like the old problem that no reader is found as it occurred with OF1.5 when you had the wrong Qt libraries

One Error is in the new 32 Skript. There is no lib64 in the 32 ThirdParty package.

/Achim

[MadsR]

OK. So it seem to work on Debian 5 too.

Good call. linux64 changed in the new 9.10 script.

/Mads

[83_Ale_83]

Originally Posted by MadsR

Alessandro,

Wierd. It seems that you don't have the bashrc of OpenFOAM available at all...?

Show us the output of the following commands:

1. ls ~/OpenFOAM
2. ls ~/OpenFOAM/OpenFOAM-1.6.x
3. ls ~/OpenFOAM/OpenFOAM-1.6.x/etc

/Mads

ale@alien:~$ ls ~/OpenFOAM
ThirdParty-1.6 ThirdParty-1.6.General.gtgz ThirdParty-1.6.linux64Gcc.gtgz ThirdParty-1.6.x

ale@alien:~$ ls ~/OpenFOAM/OpenFOAM-1.6.x
ls: impossibile accedere a /home/ale/OpenFOAM/OpenFOAM-1.6.x: Nessun file o directory

ale@alien:~$ ls ~/OpenFOAM/OpenFOAM-1.6.x/etc
ls: impossibile accedere a /home/ale/OpenFOAM/OpenFOAM-1.6.x/etc: Nessun file o directory
ale@alien:~$

ale@alien:~$ ls
Documenti examples.desktop Immagini Modelli Musica nuovo file~ nuovo file.txt OpenFOAM Pubblici Scaricati Scrivania Video

Thank you for help me

[af631717]

1) Yes it seems to work with Debian but in fact in does not.

2) cd ~/OpenFOAM/ThirdParty-1.6/gcc-4.3.3/platforms/linux64/lib64
does not exist in that package -> there is something wrong in the script.

A.

[83_Ale_83]

Maybe, and I say maybe, I have resolved my issue,

I have changed the git command

git clone git://repo.or.cz/OpenFOAM-1.6.x.git

to

git clone http://repo.or.cz/r/OpenFOAM-1.6.x.git

then I type

cd OpenFOAM-1.6.x/
. ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc

And it seems to have no problems, now I have started to compile with

./Allwmake >make.log 2>&1

I have a question for you /Mads, in your script :
At line 51 your script create a folder OpenFOAM-1.6.x, this folder must be in OpenFOAM folder to run after

cd OpenFOAM-1.6.x/
. ~/OpenFOAM/OpenFOAM-1.6.x/etc/bashrc

right?

Thank you